SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The product extends the company’s SGI Series and targets lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required.
The measurement challenge addressed by the sensor is surface texture. Conventional point-spot laser displacement sensors concentrate reflected laser energy on a small area, making readings sensitive to microscopic scratches, grain boundaries, brushed textures and matte finishes. These features can create signal variations that are interpreted as dimensional changes, potentially producing false defect warnings and requiring additional inspection. SinceVision’s wide-spot approach collects reflected light across a broader area and averages localised microscopic peaks and valleys before signal conversion. The company says this reduces the influence of surface roughness and optical scattering on materials such as drawn metals, sandblasted surfaces and coated battery foils.
Specifications and synchronisation
The SGI-N030W has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm when measuring a diffuse white target under static conditions, with linearity of ±0.02% of full scale. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes. Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition, measuring from either side of a component or moving material.
Battery electrode thickness
One principal application is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity are critical manufacturing parameters that influence energy density, internal resistance and long-term cell stability. Conventional offline inspection with contact micrometers or drop indicators can introduce operator variability and potentially deform wet or uncured electrode materials. Periodic spot measurements also cannot provide continuous coverage across an entire production reel.
The proposed inspection arrangement uses two synchronised sensors positioned above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing sensor heads measure their respective clearances to the material. A system controller combines these readings with the fixed mounting datum to calculate the electrode’s absolute thickness in real time. According to SinceVision, production trials demonstrated stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling frequency provides high longitudinal measurement resolution, enabling detection of localised coating agglomerations, edge thinning and exposed substrate areas before the electrode proceeds to cell winding.
Other target applications
The sensor is also intended for semiconductor manufacturing, where non-contact measurement is important for sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, the sensor can monitor the movement of voice coil motors, linear actuators and micro-steppers. Its 50 kHz sampling rate is intended to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot. Position data can be sent to machine control systems through the Ethernet interface for real-time monitoring and process control.
Focus on surface-related errors
Jack Li, global sales and marketing director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He says conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for additional manual inspection. The SGI-N030W’s expanded optical spot is designed to average out these surface-related variations, while synchronisation between opposing sensor heads supports high-speed thickness verification. The performance figures and production-trial result are attributed to SinceVision; the announcement does not include independent test data.
