KraussMaffei Extrusion has developed a continuous single-stage process for making PVC roofing membranes, called PVC InlineMixing, that is designed to replace the conventional two-stage route built around a separate heating-cooling-mixing combination. The company says the process can lower energy costs, shorten production time and support a rapid return on investment, while giving manufacturers more flexibility when formulations change.
In the established two-stage method, PVC powder, plasticizers, additives and fillers are first processed batchwise in a hot-cold mixer to produce a dryblend. The blend is cooled, stored intermediately and then plasticized in a twin-screw extruder before being formed into membranes. PVC InlineMixing removes the separate mixing step: all solid and liquid components are fed directly into the extruder by gravimetric dosing systems in the required proportions.
Lower energy and operating costs
According to KraussMaffei Extrusion, avoiding a separate heating-cooling-mixing combination removes the need to invest in that equipment and means the material is heated only once. Depending on the formulation, system parameters and location, the company says energy consumption and energy costs can fall by up to 75%.
The continuous layout also reduces the footprint of the overall system and lowers labor costs. Maintenance requirements are lower as well because wear parts for the heating-cooling mixer are no longer needed. The combination of lower capital expenditure and lower operating costs is intended to improve overall cost-effectiveness and create the conditions for a quick payback.
Production flexibility is another claimed benefit. Formulation adjustments and color changes can be made directly during operation through the integrated control system, according to the company, removing the time-consuming preparation and interim storage of separate dryblend batches. KraussMaffei Extrusion also says the continuous process requires fewer staff than a system based on dry-blend premixing.
Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the approach offers roofing membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing. In remarks provided by the company, he said producers can respond more quickly to new requirements, adjust formulations during production and reduce both energy and capital expenditure.
Validation and industrial reference
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a wide process window for different formulations.
Tests confirmed high gelation levels for the PVC and high product quality, according to KraussMaffei Extrusion. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations. Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production, and that the Technology Center works with customers to test specific formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.
PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant uses two extruders and two calenders to achieve a total throughput of 1,800 kg/h. In that line, PVC, additives and fillers, as well as edge trimmings generated in the process, are continuously processed directly into finished membranes.
KraussMaffei Extrusion presents the development as a way to combine high product quality with a leaner production route, making PVC roofing membrane manufacturing more cost-effective and flexible.
