Chemicals

ArcelorMittal Gent carbon-capture pilot reports over 90% CO2 capture from blast furnace gas

Mirela VargaNovember 2, 20265 min read3 views

At a glance

  • The first phase of the four-company trial logged more than 4,500 operating hours and will be followed by tests on hot strip mill reheating furnace emissions.
  • A pilot at ArcelorMittal’s Gent steelworks captured more than 90% of CO2 from a portion of blast furnace off-gas over more than 4,500 operating hours, according to the project partners. The results will inform assessments of full-scale capture and a second phase that will test the technology on hot strip mill reheating furnace flue gas.
A generic integrated steelworks shows a blast furnace connected by pipes to carbon-capture columns in industrial daylight.

A carbon-capture pilot at ArcelorMittal’s integrated steelmaking site in Gent, Belgium, has demonstrated CO2 capture rates exceeding 90% from blast furnace gas, the project partners reported. The first phase of the trial used Mitsubishi Heavy Industries’ Advanced KM CDR Process and was conducted by ArcelorMittal, MHI, BHP and Mitsubishi Development Pty Ltd.

The partners said the pilot-scale campaign generated operational and engineering data that will support an assessment of whether the technology could be applied at full scale to the Gent blast furnace. Assessments based on the trial results indicate that full-scale application to pre-combustion blast furnace off-gas could reduce CO2 intensity at the site by up to 24%. Applying capture across multiple emission points could support progress toward near-zero emissions intensity, the partners said.

Trial scope and operating conditions

Phase 1 focused on capturing CO2 from a proportion of the blast furnace off-gas and involved more than 4,500 hours of operational testing. The partners described blast furnace gas as a challenging stream because it carries dust, sulfur-containing compounds and other contaminants alongside significant concentrations of CO2 and carbon monoxide.

The trial demonstrated the technical feasibility of applying MHI’s capture technology in the steel sector under those conditions, according to the companies. In this phase, only CO2 was captured; the remaining carbon content, in the form of carbon monoxide, can be used for power and heat generation elsewhere at an integrated steelworks, with CO2 released when that gas is combusted.

Next phase targets reheating furnace emissions

Phase 2 of the trial is intended to broaden carbon capture across multiple emission points in the steelmaking process. It will test the technology on gases from the hot strip mill reheating furnace, which is fired with gas and heats thick steel slabs to the temperature required for rolling into thin sheets.

The reheating furnace uses a blend of by-product gases from steelmaking, including coke oven gas, blast furnace off-gas and basic oxygen furnace gas, together with natural gas. The second phase will assess MHI’s technology under a different and more dynamic flue-gas profile and provide further data on integrating capture across multiple processes at an integrated steelworks. The results are expected to inform updated engineering and deployment studies for future full-scale applications.

ArcelorMittal is facilitating the Gent trial; MHI is supplying the capture process and leading process engineering and technical evaluation; BHP and MDP, which supply steelmaking raw materials to ArcelorMittal’s European operations, are providing funding. Frederik Van De Velde, CEO of ArcelorMittal Belgium, described the first-stage result as important for understanding how capture can be incorporated into existing steel plants and said scaling up decarbonization technologies is the next step.

Tatsuto Nagayasu, senior vice president and head of CCUS at MHI, said completing more than 4,500 hours and exceeding 90% capture from blast furnace gas marked a milestone for applying the technology in steel. Dr. Ben Ellis, vice president of marketing sustainability at BHP, said the results demonstrate abatement potential for the blast furnace route, noting that around 70% of global steel production currently comes from blast furnace steelmaking. Tadashi Mizuno, managing director and CEO of MDP, said the phase 1 results strengthened confidence that carbon capture on blast furnace gas could offer a viable emissions-reduction pathway for the steel sector.

Reported by Mirela Varga, Polymer Testing, Circularity and Sourcing Analyst.